.png)
.png)
Customer q:
Purchased LED signal lights from you to replace my older incandescent bulbs. There were 2 wires coming out of the old lights, so I used the red and white wires from the new lights and eliminated the black wire as your instructions indicated. Now the lights come on but do not flash. I replaced the flasher with a LED flasher and still no luck. Should I be using the black wire?? The part number on the new lights is 90162. Thanks
CAR MAKE & MODEL
ac = No
drivewheel = 2WD
engine = 351 cleveland
fuel = Carb
make = Ford
model = Model A 5 window
pwrbrk = No
pwrstr = No
trans = Automatic
year = 1931
JEGS ANSWER:
If you are using only for turn or brake lights, the black wire is not used. If the light comes on but is not flashing, for some reason you are getting constant power. The flasher is not pulsing the power to the light. I think you will find the issue is with your power coming from the flasher. If you need further assistance, please let us know. We are here 24/7.
car specs
social media
.png)
.png)
The JEGS Difference
We are dedicated to providing our customers with the very best in selection,value, same day shipping and lifetime support. Thank you for choosing JEGS!
Psst! Want a chance to win FREE SCHWAG? Comment on this post and click here for details on the JEGS Comment Contest >
