.png)
.png)
Customer q:
Looking for some help in picking a cam. The 302 is a 1969 block .060 over with New Federal Mogal 10.5-1 pistons. I am using a set of 1967 289 54.5 cc heads that are mildly ported on the exhaust side. I will be running headers and an aftermarket aluminum intake not yet purchased. Carb will be a Holly 4777 650 CFM with moderate work. I am going for that "built in the early 70s" look, feel and sound, so I would like to hear the cam.. Would I use the COMP Cams RP1431-16 rocker and push rod kit with that? I also see that they recommend screw in studs and push rod plates with that cam. Is that the only option? Thanks
CAR MAKE & MODEL
ac = No
drivewheel = 2WD
engine = 1969 - 302
fuel = Carb
make = ford
model = Mustang
pwrbrk = No
pwrstr = Yes
trans = Manual
year = 1967
JEGS ANSWER:
Edelbrock cam kit #350-7122 would be a good fit with your combination. And since you are needing more that just the cam and lifters, I suggest trying Comp Cams #249-K31-238-3. And yes, #RP1431-16 can be used. In my opinion, these are the best options for you. Good luck and if you need further assistance, know we are here 24/7 to answer all your questions. Thank you for choosing JEGS!
car specs
social media
.png)
.png)
The JEGS Difference
We are dedicated to providing our customers with the very best in selection,value, same day shipping and lifetime support. Thank you for choosing JEGS!
Psst! Want a chance to win FREE SCHWAG? Comment on this post and click here for details on the JEGS Comment Contest >
