I need to replace my intake manifold bolts.
I also need the 4 adapters that go on either side of the carburetor to mount the intake manifold.
They look like 1/2 inch thick washers that fit in the holes.
Notice the 4 oval holes , 2 on each side? I need the fittings that the bolt goes thru to secure the intake manifold to the block.
CAR MAKE & MODEL
ac = No
drivewheel = 2WD
engine = 350 Chevy SB
fuel = Carburetor
make = Pontiac
model = Transam
pwrbrk = No
pwrstr = Yes
trans = Th350
year = 1981
Thank you for giving Jegs the opportunity to assist you with your technical question.
You can use Jegs intake bolts 555-83200.
No fitting or adapter needed, you will simply use your bolt with a washer
The JEGS Difference
We are dedicated to providing our customers with the very best in selection,value, same day shipping and lifetime support. Thank you for choosing JEGS!