.png)
.png)
Customer q:
I did rebuild the SB engine with a 1400 Edelbrock Carburetor, an 4BBBL adapter and an Edelbrock intake manifold. The intake manifold has some more Cooling water connectors than I need. I only need one hose connector for the cooling and there are two more for water. For those I need the Plugs to close them.
Second issue: My original Throttle bracket does not fit anymore The Carburetor has 8 holes - in the flange the inner ones are used to bolt the adapter down and the outer ones for the Carburetor - so there is no room to use the original bracket.
The original bracket would need the inner holes to fix them and one of the outer holes to get the positioning bolt in.
CAR MAKE & MODEL
ac = No
drivewheel = 2WD
engine = SB 5.7
fuel = Carb.
make = Chevrolet
model = Corvette
pwrbrk = Yes
pwrstr = Yes
trans = Manual
year = 1974
JEGS ANSWER:
Yes, Edelbrock actually makes this easy for you. They offer pipe plug assortments to plug the additional ports -
350-8051 - Black
350-8052 - Clear Zinc
They also offer a cable bracket that bolts to the two rear intake bolts -
350-8036 - Gold
350-8030 - Chrome
555-157336 - Black
You can place your order online at www.jegs.com, speak with Customer Service or request Technical Assistance via telephone at 1-800-345-4545
car specs
social media
.png)
.png)
The JEGS Difference
We are dedicated to providing our customers with the very best in selection, value, same day shipping and lifetime support. Thank you for choosing JEGS!
Psst! Want a chance to win FREE SCHWAG? Comment on this post and click here for details on the JEGS Comment Contest >
